Thoughts on Gundam Dynasty Warriors 3

Hello everyone :)
its  been a long time since i posted something, was kind of  busy at work and at home.
On December 16th 2010 Gundam Musou 3, Japanese version of Dynasty Warriors, was released.I almost  bought that game back then but then in January they announce that the american version Dynasty Warriors will be released! So i will wait for that. I never had one of gundams musou games but i will buy this game for sure!

Here are some Gameplays :

Also, Most of UC line Mobile Suits are confirmed, including the Unicorn series Mobile suits. Also the 00 mobile suits are in the game! 

Oh by the way, my 00 Qan[T] its progressing slowly but will post something later :D! 

Please comment :D!

00 Qan[T] Work In Progress (WIP) #2

Hi :D! welcome to Work in Progress #2  00 Qan[T]! Well i have been busy this days so i only manage to finish the innerframe for both legs, chest and waist. Also i have primed all the leg and waist parts!.

The Legs:

The "3d" effect is made by in the bottom by  a metallic decal and on top of it a clear green part. the top part (small one) is done by a clear green part then the sticker and finish with a clear part also!.

It has great mobility! it can bend almost 180!. :)! Good Innerframe provides good movement and stability.

The Waist:

Well there is not much to say. It dosent have much mobility, because it dosent have many parts. Sides are on a ball joint and can move.

The Chest 

Big hole for the GN drive, the green part has a foil sticker beneath!. If you use the GN Drive with LED you dont have to put the sticker, but i dont have any plans to buy one separetly.

GN Drive

Nice GN Drive, and it has a nice stand. But mmm... i have to put the GN Drive into the Qan[T] so this will be empty hahaha!.

Body so far:

This is what i have so far!. :)! IT can stand!! Its  alive!

Primed Pieces :

Here are some primed pieces! see the difference between a primed and not primed piece :)!. I used tamiya primer you can see the picture in the before WIP #1!

Well thats all! I will try to finish the innerframe this weekend :D! And maybe paint some parts! Thanks for watching!

I Got a Package #3

Hi, long time no see!. Yeah i was kind of busy but i manage some time to post this!
i received a package directly from a great gunpla store in US, www.robot4less.com, go to their website or facebook page an look for the coupons!.

Package from US receveid by local postal service

I ordered 3 sheets of water decals for : MG Unicorn ver KA ( i will use it for my OVA version), MG Sinanju (hell there are a lot!!) and MG Strike Freedom!. Also some Mr. Color paints, Mr. Surfacer, Mr. Leveling Thinner, Mr. Mark setter and Mr. Mark Softer ( both for decals!). 

Because R4L delayed my order they gave me free gifts! (awesome!). They manage and send me a water decal kanji custom set and an amuro vintage figure!.

Strike Freedom and Sinanju water decals :

Custom Kanji and Unicorn ver Ka decals:

Amuro Ray Vintage Figure :

Mr. Color paints, most of them are blue like cobalt blue, navy blue, susie blue, sky blue, blue. Also Gun Metallic, white and Red Madder. Leveling thinner also.

Mr. Surfacer for primer pieces. Mr. Mark Softter and Mr. Mark Setter. Mr. Mark Setter is before i apply the decals for it to stick better to the surfacer and Mr. Mark Softer is for after applying the decal to "melt" the decal into your gunpla. Steps will be :

1.- Top Coat GLOSS
2.- Mr. Mark. Setter
3.- Apply water decal
4.- Mr. Mark Softer.

Thats all! Tomorrow i will post my wip #2 for my Qan[T]! thanks for watching :D!

00 Qan[T] Work In Progress (WIP) #1

Finally i got some time to just start this 00 Qan[T], this is the manual :D! It said to start with the chest and the GN. Drive but i start with one leg , i didnt have much time :(!.

Manual

What i used is this primer, i finally found a place here to buy some Tamiya spray cans and bought this primer. This primer is lacquer based and its very harmfull for your health if you dont use a mask.

Front Side

If you are painting with laqcer based paints like this primer you MUST use a mask for protecting you from particules of paint get into your lungs!. Bought one at a Home Depot Center near my house, it is  an 3M mask.

I knub off some pieces from one leg at spray primer on the pieces, first i washed them with water and soap! just to make sure there wasent any dust or anything.

This was the first time i have used a primer so it didnt go perfect, some pieces like this got like little spots, but i will sand it and put another coat of primer! i think i didnt shake enought the can of primer or i just put to much! i will be more carefull next time

I will be painting with primer during the week, I must wait untill some Mr. Color paints i ordered arrive for paint the actual colors!. :)! Please feel free to comment and if you have any suggestion please let me know!.

I Got a Package #2

Hi :D!
This is my 2nd " I Got a Package", this time one friend of mine was in the US and i bought from www.robot4less.com (Great store, great sales, great customer service :D) and shipped to her home. Now i got them here in Peru :D!

Also this is the new design of the blog, do you like it?

Well i ordered 2 great Master Grades! and also Decals! Yeah! haha water decals! and some colors :)!.

MG Gundam Unicorn OVA version

MG Red Frame 

MG Victory Gundam Water Decals

 Water Decals in Katoki Hajime's kits are a must!!!

MG RX-78-2 Gundam water decals

Unicorn Base version

Green Sparkle Base

Mr. Cement and Mr Colors

Bought one Mr. Cement Deluxe, and the colors are Green Metallic, Fluorusent Green and pink. :)!.

Also good news! I will start building the 00 Qan[T], first i will take off the pieces from the runners, sand them and then primer, then i will paint when the new paints arrive :D!

Thanks to all! and please feel fre to comment! or be fan at facebook :)!

Gundam Figure : Talia Gladys

Talia Gladys is captain of the newly commissioned Minerva.She has shown good instinctive battle tactics and often orders the support ZAKU units to stay close to the ship, limiting the amount of damage done to the ship.

Now its turn of Ms. Captain Talia Gladys, she was  Gilbert Durandal love in the anime Gundam Seed Destiny.

Now he looks in a natural place (maybe heaven? because she died in the anime)! :)

Zaku Tri Stars saved her :D!

Captain sitting on her new suit!

Here is the 3 figures i have posted so far :D! Nice female figures :)! Of Gundam Seed & Destiny.

Gundam Figure : Luna Maria Hawke

Lunamaria Hawke is a mobile suit pilot for the ZAFT military forces. She typically pilots a red ZGMF-1000 ZAKU Warrior. Lunamaria appears to wear a customized version of the ZAFT red ace uniform, replacing the standard female-issue skirt with a miniskirt. She attended ZAFT military academy together with her sister Meyrin Hawke, fellow pilots Shinn Asuka and Rey Za Burrel, and mechanica Vino Dupre and Yolant Kent . All are stationed on board the battleship Minerva for most of the series.

Well now, Luna Maria is wearing casual clothe in this Figure , hope  you like it :)!

Lacus Clyne head in Luna Maria's body xD!